Connect with us

Health / Home

This is the correct way to approach and pet a dog you don’t know

Published

on

Petting a mongrel dog in the middle of the street

How to approach a dog avoiding any embarrassing situation? The answer, in detail.

How to approach a dog for the first time?

Petting a mongrel dog in the middle of the street

Petting a crossbred dog in the middle of the street. source: spm

Generally, when we meet a person, we politely greet them by shaking hands or nodding. Also, in the canine universe, you don’t see behaviors that tend to be too “cordial” good eye. Some dogs misunderstand this behavior and see it as a form of dominance. Therefore, they become more aggressive.

You can be nice to a dog you first meet by walking up to him, looking him in the eye, and then patting his head. Nonetheless, This could be misunderstood by the latter, especially if poorly socialized. Also, it may not make sense for him to rush him by putting his head between your two hands to pet him. On the contrary, he will do his best to get rid of his domination.

If this is your first time meeting a dog, be a bit standoffish. Let him come to you first. Wait a few minutes before approaching him, as normally as possible. Assuming an unhesitating stance, crouch down close to him and speak to him in a calm tone, pointing downward with one of your free hands. remember that the it is essential to wait for a natural reaction from the dog, avoiding forcing him to accept any caress.

Also, some dogs feel threatened when you approach them head-on, when you make too much noise with sudden gestures, or when you rush toward them quickly, either walking or running. Finally, never get too close to a dog you don’t know, while avoiding looking him directly in the eye.

You may also like :   Do you leave your room door open at night? Here's why you should change this habit

Dog approached for the first time: deceptive gestures

approach a dog

Approach a dog. source: spm

Before approaching a dog for the first time, it’s best to decode certain signs that he may return. For example, dog tail wagging doesn’t necessarily mean is happy or content. This restlessness may reflect a certain curiosity or even a defensive attitude, since you are still unaware of the intentions behind such an approach.

Thus and before approaching a dog, you must first take his master’s permissionthe latter will be able to better explain the attitude adoptedin particular according to your emotions and your state of mind, at this very moment.

However, watch out for these two behaviors when approaching a dog for the first time:

If the dog lifts its head, tail, hair stands on end, ears point forward, and gaze freezes, it means that it is in a defensive position. so avoid of’Getting closerr and above all, hold kids far of the.

Finally, in case the dog is quite reserved, place his tail between legs and lowering his ears, he knows then, who is on guard. Also in this case, stay away from him, because he can become threatening at any time.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Health / Home

What is (really) the blue part of the eraser for? No, it is not to erase the pen.

Published

on

use eraser

What is the blue part of the eraser for?

use eraser

Using the eraser – Source: spm

Generally intrigued by this blue rubber material, most students have fun using it at school and at home. Obviously, some have found that it wasn’t really effective at removing pen marks. However, others are still very stubborn and struggle to prove that it works. So much so that most of them end up squeezing so much that they even break their notebooks. Stop misunderstanding! This blue part does not have the ability to attack the feather. But then, what exactly is it for? In truth, it has precisely the same vocation as the pink part: it is also used to erase the pencil, with the only difference that it is recommended to use it on harder paper, such as a sheet of cardboard or the canson paper that we use. draw. This is because the pink side of the eraser is made of a softer material and is therefore suitable for normal paper. Although the blue area is stiffer and rougher, it is much better suited for erasing writing on solid materials where there is little risk of breakage. Furthermore, it is even possible to use it on the walls to eliminate the scribbles of small children.

Blue part of the rubber: what do the specialists say?

Rubber

An eraser – Source: spm

Pelikan, the well-known German company that produces fountain pens, school and office supplies, has just published a statement on its website in this regard. After noticing the doubts and questions from Internet users about this famous eraser, the brand decided to settle the doubt by giving a clearer explanation. So, on their platform, the managers tried to present the product in the best possible light, trying to explain it in detail in simple words. Thus, we learn that the color blue is actually used to erase pencil marks, but also the ink in ballpoint pens. However, reading this press release, despite various explanations from the German company, many people were left undecided and dissatisfied. They still have big doubts and are not really convinced about its usefulness about a possible ink.

You may also like :   Here's why you shouldn't open the dishwasher after the wash cycle

How to properly clean your eraser?

Whatever its true function, in order for it to work really well and not leave any stains on the page, it is important that the eraser is perfectly clean. A dirty eraser is very likely to damage your work and mar the white sheet. Therefore, it is essential to clean it well. How to proceed ? It’s very simple: take a sheet of thick paper and rub it hard with the eraser. The material will help remove dirty areas. Obviously, it is necessary to check that the sheet does not contain any trace of ink so as not to dirty it more. Feel free to repeat the process a few times until the eraser looks perfectly clean.

And, precisely, how to prevent it from getting dirty?

So that your eraser lasts longer and you don’t have a problem using it, you should take into account some recommendations to keep it always clean.

·Keep it away from pencils and colored pencils, as the dust from these materials could easily make it dirty. Also, do not leave it next to the markers without a lid, which risks damaging it at the slightest movement.

·Keep the eraser in an isolated corner of the case. This will prevent it from being exposed to ink from ballpoint pens, harmful materials, or dust.

Continue Reading

Health / Home

How to make the plate glow? A simple product from your kitchen is enough to work wonders

Published

on

baking soda001

Among the little tips to make everyday life easier, some products will never stop being talked about. This is the case with sodium bicarbonate, commonly known as “multi-purpose powder”. A great classic of the ecological home, baking soda is an effective product, especially to make your hob shine.

How to make a baking sheet shine with baking soda?

baking soda001

Sodium bicarbonate. source: spm

The bicarbonate acts in depth on the remains of burned and blackened fat that can be seen on the plate. Its abrasive properties make it possible to completely remove dirt (grease, rust, etc.) from iron, metal or stainless steel objects.

Used alone or combined with other products such as lemon and other citrus fruits, the result is always surprising.

1- Clean the plate only with baking soda and water

To remove greasy plaque, generously sprinkle two to three tablespoons of baking soda over the entire surface. Add a little hot water so that the bicarbonate powder becomes slightly pasty and leave it to act for about fifteen minutes before rub gently using an anti-scratch sponge, especially if you have a ceramic hob. Then use a damp cloth or towel to clean. Your board is now like new. The same process is also effective against rust.

2- Shine the countertop with baking soda and lemon juice

baking soda and lemon

Baking soda and lemon. source: spm

Thanks to its antioxidant properties, lemon works very well with baking soda when cleaning. You just need to take half a lemon which you will lightly rub all over the scrubbing surface where the baking soda has already been applied and clean as described above. Your board will regain its luminosity and shine after this operation.

You may also like :   There is a knob on the oven door. Most people don't know how useful it is.

3- Shine the countertop with baking soda and cider vinegar.

The combination of these two products is an effective remedy to fight against the most stubborn dirt residues. However, it is contraindicated to use them simultaneously.

In fact, if you combine baking soda with cider vinegar or white vinegar, you’ll get an acid-base solution. In other words, the acidity of the vinegar will dissolve into the basic properties of the baking soda. Thus, the two elements cancel each other out and retain only a small cleaning action. Therefore, it would be better to use them one after the other.

After applying your baking soda paste to the hob, spray with vinegar and allow the foam that results to loosen the grime. Wipe off with a water-soaked towel and voila! In addition to its stripping action, vinegar also repels cockroaches due to its smell.

Other natural solutions for cleaning glass ceramics

Of course, there are other grandmother’s tricks that make it possible to get rid of the dirt, at a lower cost, while respecting the environment.

  • Coarse salt: Salt is also effective in absorbing fat. Sprinkle your baking sheet with coarse salt and lemon juice. After a few hours, scrub with a sponge and clean with water.
  • black soap: It is usually used for the skin, but black soap also helps to remove oil. Put a little on a damp sponge to cover the surface to be scrubbed. Let sit for a while before scrubbing and then clean with water.

As you will have understood, in addition to baking soda, there is a whole range of natural products in your home; especially in your kitchen, which can also be used as a cleaning product.

You may also like :   Here's why you shouldn't open the dishwasher after the wash cycle

Long underused due to a lack of information about it, baking soda could change your life if you embrace it daily. Removes dental tartar, restores whiteness to yellowish-white linen, cleans tiles cleanly, aids hair growth, and is even recommended for making your own detergent or air freshener.

Continue Reading

Health / Home

How to properly store nuts to preserve their benefits?

Published

on

Store nuts away from air and light.

Since ancient times, the walnut has earned a reputation for being good for the brain because of its brain-like shape. It is not modern science that will say otherwise. She is without a doubt the queen of nuts. Here are some tips to get the most out of it.

How to properly store nuts?

The walnut is an autumn fruit and if it appears on the stalls in September, it can be eaten throughout the year as long as it is well preserved. What makes it rich is also what makes it fragile and perishable: its high content of fatty acids. Let’s not forget that the recently picked dried fruit is a fresh fruit and that if it is stored improperly, it can quickly go rancid and lose its qualities.

1- Fresh shelled walnuts.

They are brittle and can oxidize and lose their flavor very quickly. Never leave them out in the open or placed in the kitchen, it is too hot a room. For short-term storage, place them in an airtight jar, preferably glass, protected from light and heat. For storage for several weeks, the best place is the refrigerator because nuts like fresh. Be careful to place your beans in an airtight box or bag, so that no moisture gets in. Also remember to keep them away from foods that give off strong odors such as onions, since like oilseeds, nuts have absorbent power. Finally, for a long conservation, do not hesitate to freeze them to preserve their benefits. You only have to take them out for a few hours at room temperature before eating them. Do not thaw them in the oven, the heat will damage them.

You may also like :   Here is the dirtiest place on the plane: it is almost never cleaned, what to do before using it

2- Walnuts in shell

Freshly picked, they must be dried in the sun for at least 3 consecutive days. To do this, spread them out on a sheet and don’t forget to bring them in at night because they hate humidity. Once dry, store them in a basket or net, so that air circulates, ideally in a dry and cool place at no more than 10°C. Don’t forget to stir them from time to time. You can keep them for several months. If you want to keep them in their shell, fresh and without drying out, put them in the fridge or freezer.

Store nuts away from air and light.

Store nuts away from air and light. source: spm

The benefits of nuts

Know that consuming 30g of fresh kernels, or about 7 nuts per day, is enough to cover your daily intake of essential fatty acids. And let’s be clear, this healthy amount will not make you fat and, on the contrary, is beneficial for your health. Little advice: soak the nuts in water before eating them so that they release their active ingredients.

In addition, nuts favor intestinal transit because, oily and rich in fiber, they are indicated in the natural treatment against constipation.
In addition, its nutritional values ​​provide a satiety effect, which allows you to reduce the amount of food on a daily basis. It is a very healthy appetite suppressant which is an advantage during a diet.

Nuts a health benefit

Nuts: an asset for health. source: spm

Now you no longer have excuses for not eating nuts. Do not forget that you can incorporate it into your sweet and savory recipes to combine the useful and the pleasant.

You may also like :   Do you leave your room door open at night? Here's why you should change this habit

Continue Reading

Trending