Connect with us

Health / Home

How to Unlock a Stuck Fuel Door

Published

on

Avez-vous aussi un cordon caché dans votre coffre final

This is a common situation: you arrive at a gas station to fill up with gasoline or diesel. Except there is an unforeseen event. Without warning, you notice that the fuel door is playing a trick on you by categorically refusing to open. Despite all your attempts, nothing works, it seems completely blocked. Panic grabs you by the throat and you immediately consider calling a tow truck.

Calm down, before asking for help and to avoid unforeseen expenses, it is possible that you can easily get out of this situation on your own. You may not know it, but you have a life-saving tool in your trunk. A hidden lanyard that will come to your rescue in these types of situations.

What causes a stuck fuel door?

Damaged/loose fuel door lever

The fuel door lever is used to open the fuel door from inside the vehicle. If pulled too hard, it can come loose and break.

Damaged release cable

On most vehicles, a cable connects the fuel door lever to the fuel filler door. If this wire breaks or comes loose, there will be no connection and the fuel door will not open. It will need to be replaced in order to open the fuel door.

Defective hinge or spring

On most fuel doors, there is a spring that helps open the door. Sometimes this spring or hinge needs lubrication to function properly. In other cases, the spring can be physically damaged, broken, or loosened.

You may also like :   How to keep silverfish away naturally?

blown fuse

On electric gas doors, a fuse is connected to the interlock solenoid, a component that holds the gas door closed. If the fuse that controls it is blown, you will need to replace the fuse.

damaged wiring

A damaged wire can prevent the fuel door system from working. This is because the current cannot reach the gate. The wiring will need to be replaced before the fuel door will open again.

An unusual situation, but very annoying!

Open trunk

Open trunk – Source: spm

Refueling is one of the most mundane activities for any motorist. However, even the simplest and most innocuous task can sometimes turn into a nightmare. How do you react when the fuel door refuses to open? Pretty nervous, right? But tell yourself that such an unpleasant surprise can surprise you at any time, especially in winter, when the central locking actuator freezes due to severe cold. It can also become clogged with a buildup of dirt and therefore get stuck, making opening tedious, if not impossible.

Sometimes it is enough to loosen the power cable so that no electrical impulse activates it. However, not all cars are equipped with an actuator that opens the fuel filler door. Some have a bolt that can get stuck and cause problems. On the other hand, in the older models, there is often no actuator or lock, and the fuel filler cap is opened with a key. Fortunately, these types of mishaps are quite rare, but you never know, they could happen to you . In this case, you need to know how to react, without involving a specialist who will have to be paid.

open the fuel door

Open the fuel door – Source: spm

When the hatch refuses to open, you first feel a sense of helplessness. So, you refuse to be disappointed and you multiply your attempts to unblock the situation. Except the harder you force things, the more you risk permanently damaging the mechanism. Better not aggravate the problem. There is also no need to consider calling a tow truck. There’s a little trick that can quickly get you out of a bind. This is a fuel tank emergency release system.

You may also like :   How to remove rust from windows and doors without painting them?

Car manufacturers have thought of everything: and if you’d read your owner’s manual, you’d know there’s a cable hidden in your trunk, especially dedicated to the emergency fuel tank release. This cord is usually tucked under the fabric lining of the trunk and protected by a plastic cover (this device is present on most car models). Once you locate it, simply pull the cable or lever to open the filler hatch. You will be able to breathe and refuel your car calmly.

NB : if you encounter the slightest problem, take a look at the manual to get all the useful information about this emergency fuel tank opening system.

The golden rule to repair a fuel trap is to define what are the direct causes of the failure. Following the diagnosis of a professional, if the problem is due to a deficiency in the hinges of the hatch or any other element, then it will probably be necessary to replace the entire mechanism.

But, perhaps also that over time this area has accumulated a lot of dust and dirt residues. If you are not in the habit of cleaning it from time to time, the whole system can go bad. In which case, careful cleaning is required. But, in most cases, if the hatch has had its day, it’s best to replace it to avoid having this type of failure in the future.

read also How to save over 20% on your home heating bill without spending a dollar

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Health / Home

How to change the color of the WhatsApp keyboard?

Published

on

WhatsApp l'astuce incroyable pour changer la couleur du clavier final

Are you tired of the monotonous appearance of your WhatsApp keyboard? Want to add some color to your messaging experience? It’s time to give this app a unique style for you. Discover this WhatsApp function that will allow you to achieve it.

Beyond replacing the wallpaper with another image, one of the functions that marks a real change is being able to change the color of your WhatsApp keyboard. Here we show you how to achieve this effect in a very simple way.

read whatsapp messages

WhatsApp keyboard – Source: spm

  1. First of all, download the Google keyboard called Gboard on your mobile. Then set it as default.
  2. Next, open the WhatsApp app and click on any conversation.
  3. Start writing a text, you will see a kind of gear on the keyboard part.
  4. Press it, a different menu will appear. Go to “Theme” and choose the color you want configuring it to your liking. There are several models.
  5. When finished, the color of the WhatsApp keyboard will have changed.

Thanks to this trick, your messages will stop being boring and will now be more creative, although only people with the beta version of WhatsApp will be able to make this change. Since WhatsApp does not include any button or method for this type of text to appear, so it will only appear if you do it manually.

Also read: The trick to activate reverse writing in WhatsApp: secret mode to surprise your friends

whatsap app

WhatsApp application – Source: spm

Other tips to customize your WhatsApp chats

How to write bold on WhatsApp?

To create bold text, simply place an asterisk before or after the text you want to send to your contacts. So, the text before sending looks like this: *your sentence*.

How to write in cursive on WhatsApp?

If you want the text to be italicized, place an underscore before and after the text. That is, before sending the declaration: _your text_

Also read: Locate any contact on WhatsApp, without asking for their location with an easy trick

How to write crossed out words in WhatsApp?

If you want to write text as if it were struck through, you will need to use this symbol (~) before and after the text. So it will appear like this before sending: ~your phrase~.

How to write in minivan in WhatsApp?

Writing in a monospaced font in WhatsApp will give your text a vintage and different touch. To get this type of text, all you have to do is put the word or sentence between three open accents (`) like this: “`your sentence“`.

Also read: WhatsApp: how to prevent the application from automatically saving photos that fill the memory

You may also like :   How to remove mold stains that grow around windows
Continue Reading

Health / Home

How to prevent boiling water from boiling over: simple and practical tips

Published

on

L’eau bouillante ne débordera plus de la casserole grâce à l’astuce des chef0011

It is well known: to prepare a recipe based on pasta or rice, it must be immersed in a large volume of boiling water. But very often, our pan always ends up overflowing… Don’t panic! We reveal the advice of Thomas Langevin, chef of the Aude to avoid this unfortunate inconvenience and succeed in your culinary preparations on time.

Foam formation in boiling water

Foam formation in boiling water – Source: spm

add oil to water

When you boil vegetables, rice or pasta, you notice the formation of a foam on the surface of the water. In heat, the bubbles exert pressure, often causing spills.

To avoid these inconveniences, add oil to the water, it acts well on the foam, preventing it from forming. This will prevent the water from overflowing. Remember that it is important to act at the right time, so add the oil from the beginning of cooking.

Also read: The magic trick to open a glass jar too tight without forcing

Sometimes it also happens that water spills out for a simple reason – long-term use of a lid on the pot. This tool certainly saves time by heating the water more quickly, but it prevents the escape of water vapor.

Use a wooden spoon

There is another very simple and equally effective trick to prevent the water from overflowing from the pan, place a wooden spoon and that’s it!

The wood acts as an insulator. The bubbles that form when the water boils will thus be reduced thanks to the contact with the wood.

Why does pasta water foam?

Pasta is made from flour, water, and sometimes eggs, starch, and protein are dried and stored in it. When you put them in boiling water, a hot and humid environment, the starch continues to absorb more and more water until it bursts. The result is that the starch molecules are pushed into the water, creating the foam you see.

The starch also causes the pasta to stick together in the middle of the cooking process, so you need to stir occasionally to prevent a giant dough from forming. Once the pasta has finished boiling, the water becomes saturated with starch. So adding a bit of this water to your seasoning will allow the sauce to adhere better to your pasta.

rice in boiling water

Rice in boiling water – Source: spm

Rice is a staple in many kitchens. It is very simple and easy to prepare. However, when cooking, boiling water can quickly overflow. This is the best method to prevent the rice from boiling over and sticking.

Also read: I always have a bottle of rice at home, this amazing thing saves me a lot of trouble.

  • Rinse your rice in several changes of water to remove excess starch.
  • Place the rice in a larger pot. This trick simply allows larger bubbles to form so that the liquid properly covers the beans.
  • After boiling, reduce the heat to very low.
  • The rice may take a few more minutes to cook.

If it often happens to you that the rice sticks to the pot, add vinegar during cooking. The effect is achieved by its high content of acetic acid.

To use it for this purpose, once the water starts to boil in the pot, add a little apple cider vinegar and wait for it to come to a boil again. When you add the vinegar, lower the temperature for a few moments. Then we add the rice and cook as usual, controlling the intensity of the heat and stirring from time to time so that it cooks evenly and thus does not stick or burn.

Also read: Why shouldn’t boiling water be poured into the sink? The big mistake that many people make

You may also like :   How to remove rust from windows and doors without painting them?
Continue Reading

Health / Home

Extractor hood cleaning: 7 tips for the home

Published

on

Nettoyage de la hotte aspirante - 7 astuces maison

Getting down to business to clean the kitchen hood is not an easy and pleasant activity. Fortunately, there are several effective methods approved by our grandmothers to simplify this task. Thus, stubborn grease and dust will disappear in no time. Here’s how to make your cooker hood glow with home hacks.

cleaning the kitchen hood

Cleaning the kitchen hood – Source: spm

  • Dishwashing liquid to remove dirt

Dishwashing liquid is ideal for removing stubborn dirt and grease from the cooker hood. To carry out its cleaning, you will need a large bowl, in which you pour half a glass of dishwashing liquid and hot water. Then mix the solution well until it forms a foam. Use a sponge to thoroughly clean the entire hood. Then rinse the sponge to clean the hood again. Finally, dry the surface with paper towels or a dry kitchen towel.

  • Vinegar Water to Fight Hood Grease

Vinegar water is an old method of removing hood grease, and a very effective one at that. To do this, you will need vinegar, a spray bottle, and warm water.

Also read: Do not throw away the apple skins, put them in a jar: you will save a lot

First, mix equal parts of water and vinegar and pour it all into the sprinkler. Carefully spread this solution on the grid as well as the rest of the device. Let the mixture rest for 15 minutes. After this time has elapsed, use the pointed end of the sponge to gently remove any stubborn dirt, then wipe with a damp cloth and dry the hood with paper towels or a dry cloth.

  • Olive oil for a clean cooker hood

As it turns out, olive oil can have many uses in a kitchen, especially cleaning the range hood. First, apply a small amount of oil to the entire surface of the hood using a sponge. Then cover it with a microfiber cloth soaked in warm water. After a few minutes, scrub everything down with a sponge and wipe clean.

  • A dishwasher tablet for a hood like new

To avoid the accumulation of grease and dirt in the hood, clean it with a mixture of hot water and dishwasher tablets that will melt. Begin by spraying the areas to be cleaned. Let the solution sit for 30 minutes to 1 hour, depending on the amount of embedded dirt. Then use a damp cloth to easily remove the grease.

Cleaning the hood grill

Cleaning the hood grill – Source: spm

  • Baking soda for a clean hood

Baking soda is our best ally in many household tasks. It has strong cleaning properties as it is a caustic substance. First, bring the water to a boil in a medium saucepan, then add two tablespoons of baking soda. The mixture will start to foam after a few minutes, this means it is ready to use. Use a sponge soaked in this foam to carefully clean the entire surface of the hood and vent. If the entrance is too narrow, clean those hard-to-reach areas with a toothbrush. Finally, dry the entire hood and grill with paper towels or a microfiber cloth.

  • Salt and limestone for a nickel bell.

For effective cleaning of your cooker hood, use a solution based on salt and limestone by mixing the ingredients in hot water. Apply the mixture to your hood with a soft cloth, then rinse and buff for a flawless result.

  • Lemon to clean the hood

To clean your range hood, boil water with lemon or lemon juice. Turn on the range hood to draw in the steam for 15 minutes. After that, wipe the hood with a soft cloth, rinse and wipe it.

To clean your cooker hood filters that are clogged with grease, you must first remove them using the retaining clip located on the front or side depending on the model. Prepare a cleaning bath in your sink or bathtub, then submerge your filters in it. You can soak them in a solution of boiling water, baking soda, and dish soap for 30 minutes, or use a mixture of boiling water and black soap shavings. Once the filters foam, use a soft brush to scrub them, rinse them with clean water and let them dry. Once clean, the filters are ready to be used again.

For the final maintenance of your hood, clean the exterior walls. Dampen a soft cloth with isopropyl alcohol and gently wipe the entire device to restore its shine. If your range hood is a traditional range hood with a chimney covered with plaster or wallcovering, use a small vacuum brush to remove any dust, then wipe with a damp cloth and some mild cleanser.

Also read: Why do you have to put shaving foam on the mirror once a month? Gets rid of a problem we all have

How often should the cooker hood be cleaned?

To keep your cooker hood in good condition, it is recommended that you clean it every two months with normal use. However, if you use it frequently, more frequent cleaning will be required to prevent grease buildup.

Also read: Put a dishwasher tablet in the washing machine: you won’t regret it!

You may also like :   What temperature should you set your central heating system to to lower your bill?
Continue Reading

Trending