Connect with us

Health / Home

How to make the plate glow? A simple product from your kitchen is enough to work wonders

Published

on

baking soda001

Among the little tips to make everyday life easier, some products will never stop being talked about. This is the case with sodium bicarbonate, commonly known as “multi-purpose powder”. A great classic of the ecological home, baking soda is an effective product, especially to make your hob shine.

How to make a baking sheet shine with baking soda?

baking soda001

Sodium bicarbonate. source: spm

The bicarbonate acts in depth on the remains of burned and blackened fat that can be seen on the plate. Its abrasive properties make it possible to completely remove dirt (grease, rust, etc.) from iron, metal or stainless steel objects.

Used alone or combined with other products such as lemon and other citrus fruits, the result is always surprising.

1- Clean the plate only with baking soda and water

To remove greasy plaque, generously sprinkle two to three tablespoons of baking soda over the entire surface. Add a little hot water so that the bicarbonate powder becomes slightly pasty and leave it to act for about fifteen minutes before rub gently using an anti-scratch sponge, especially if you have a ceramic hob. Then use a damp cloth or towel to clean. Your board is now like new. The same process is also effective against rust.

You may also like :   How to keep dogs urinating or defecating away from home

2- Shine the countertop with baking soda and lemon juice

baking soda and lemon

Baking soda and lemon. source: spm

Thanks to its antioxidant properties, lemon works very well with baking soda when cleaning. You just need to take half a lemon which you will lightly rub all over the scrubbing surface where the baking soda has already been applied and clean as described above. Your board will regain its luminosity and shine after this operation.

3- Shine the countertop with baking soda and cider vinegar.

The combination of these two products is an effective remedy to fight against the most stubborn dirt residues. However, it is contraindicated to use them simultaneously.

In fact, if you combine baking soda with cider vinegar or white vinegar, you’ll get an acid-base solution. In other words, the acidity of the vinegar will dissolve into the basic properties of the baking soda. Thus, the two elements cancel each other out and retain only a small cleaning action. Therefore, it would be better to use them one after the other.

After applying your baking soda paste to the hob, spray with vinegar and allow the foam that results to loosen the grime. Wipe off with a water-soaked towel and voila! In addition to its stripping action, vinegar also repels cockroaches due to its smell.

Other natural solutions for cleaning glass ceramics

Of course, there are other grandmother’s tricks that make it possible to get rid of the dirt, at a lower cost, while respecting the environment.

  • Coarse salt: Salt is also effective in absorbing fat. Sprinkle your baking sheet with coarse salt and lemon juice. After a few hours, scrub with a sponge and clean with water.
  • black soap: It is usually used for the skin, but black soap also helps to remove oil. Put a little on a damp sponge to cover the surface to be scrubbed. Let sit for a while before scrubbing and then clean with water.
You may also like :   How to widen the shoes that hurt you to adapt them perfectly to your feet?

As you will have understood, in addition to baking soda, there is a whole range of natural products in your home; especially in your kitchen, which can also be used as a cleaning product.

Long underused due to a lack of information about it, baking soda could change your life if you embrace it daily. Removes dental tartar, restores whiteness to yellowish-white linen, cleans tiles cleanly, aids hair growth, and is even recommended for making your own detergent or air freshener.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Health / Home

How to defrost a freezer without unplugging it

Published

on

L’astuce de génie pour dégivrer un congélateur final

Periodic defrosting of the freezer is an important operation to maintain the efficiency of the appliance and save on the electricity bill. The layer of ice that forms inside it can have various consequences on the efficiency, duration and above all on the consumption of the appliance. Find out why defrosting your freezer saves energy and how to do it quickly without having to unplug it.

Frost in the freezer

Frost in the freezer – Source: spm

Why is it necessary to defrost the freezer regularly?

Periodic defrosting of the freezer is an important operation to maintain the efficiency of the appliance and avoid consuming a lot of energy. This operation, if carried out correctly, would save 30% of your consumption for every half centimeter of frost removed. Here are the reasons.

  • Reduce energy consumption

The layer of ice that forms inside the freezer is several inches thick and can reduce the efficiency of the motor, making it work harder and therefore consume more energy. This happens because the layer of ice acts as a barrier to the flow of heat from the outside environment to the motor, causing it to increase its speed to maintain the desired temperature inside the freezer. In addition, the thermal resistance of the freezer walls increases, making it difficult for heat to transfer from the outside environment to the inside of the appliance. Therefore, removing excess ice allows the engine to run more efficiently and consume less electricity.

Also read: How to defrost car windows? This little-known button does it in 2 minutes

By preventing proper heat exchange with the outside environment, the layer of ice inside the freezer can cause the motor to overheat. When the motor overheats, its efficiency decreases and power consumption increases. Also, overheating can damage the motor and shorten the life of the device. Therefore, by defrosting your freezer, you prevent the motor from overheating and protect the appliance from damage that excessive heat can cause.

  • Improve conservation efficiency

The layer of ice inside your freezer can prevent the circulation of cold air, reducing its ability to store food. When cold air is not circulated properly, some areas of the freezer can get hotter than others, creating the ideal conditions for bacteria to grow and food to spoil. By removing the accumulated ice, a better circulation of cold air is guaranteed and therefore a better conservation of food, thus avoiding its waste.

How often should the freezer be defrosted?

The ideal time to defrost the freezer depends on the layer of ice that has formed inside the appliance. Generally, it is advisable to carry out this operation when the ice layer has reached a thickness of about 3-4 millimeters, since at this stage its energy consumption can increase by up to 30%. If the appliance is used frequently and the ice layer forms quickly, it will need to be defrosted more frequently. Conversely, if it is used less frequently, the ice layer will form more slowly and the frequency of thawing may be reduced.

Also read: Turn on your radiators only at this time: you will save on your electricity bill

defrost a freezer

Defrosting a freezer – Source: spm

Obviously unplugging it is the easiest way to defrost a freezer, but how do you do it even when it’s plugged in? Unplugging the appliance runs the risk of compromising the preservation of both food in the freezer and food stored in the refrigerator. These are the steps to follow to defrost it even when plugged in:

  1. Remove all food from the freezer and place it in a cool place.
  2. Place a saucepan with boiling water inside to raise the temperature and collect the water that will form when defrosting
  3. Close the freezer and wait for the ice to melt. This way, the heat from the boiling water will help melt the ice faster.
  4. Open the freezer from time to time to let in warm air, which will also help melt the ice faster.
  5. Use a damp cloth, towel, or blunt object to remove any remaining ice. Avoid using pointed or sharp objects, as they could damage the finish of the freezer and also injure you.
  6. Completely dry the freezer.
  7. Close the freezer and wait for the temperature inside the appliance to return to its normal values ​​before putting the food back in its place.

Also read: The simple and easy trick to defrost the freezer in 15 minutes

You may also like :   How to keep dogs urinating or defecating away from home
Continue Reading

Health / Home

What zodiac signs will meet an interesting person at the end of January 2023?

Published

on

3 signes du zodiaque vont bientôt rencontrer une personne incroyable qui va changer leur existence_

It’s always good to meet new people and expand your network. This is what will happen to these representatives of the zodiac signs at the end of January. The transit of Venus in Pisces, on January 27, will push you to reach out to others and have interesting meetings.

Venus in Pisces can also push the signs to seek a little more freedom in their relationships and to let go. Find out who will make a good meeting during this period.

What zodiac signs will meet an interesting person?

The planet of desire and relationships is exalted in the sign of Pisces. What does it mean ? Venus in Pisces will have a much more romantic and the natives of these zodiac signs they will be more willing to love and reach out to others.

Also read: Lunar hairstyle calendar for February 2023: the best dates for a successful haircut

Aries

aries zodiac sign

The sign of Aries. source: spm

Venus feels at home in the sign of Pisces, because just like this Water sign, this planet seeks to bring people together and bond. Pisces has a force of attraction that suits this planet of love. Transiting in this sign, from January 27, Venus will strongly influence the natives of the sign of Aries. In fact, the representatives of this Fire sign will want to expand their social circle. After weeks of isolation, especially with Mercury and Mars retrograde, Aries will want to get out and meet new people. For the rest of January, they will reach out to each other and really get to know them. At first, they will have some difficulty opening up and finding an interesting person, but over time things should improve. The situation for Aries will change at the end of January and they will meet a person who will correspond to them on all points. This person will be kind to them and they might experience something very beautiful.

Lion

the sign of leo

Leo’s sign. source: spm

The representatives of the Leo sign will be ready to start a new stage in their lives with the transit of Venus in Pisces. This end of January will be important for the natives of this Fire sign, who will have the sole objective of meeting a new person. Things will happen naturally. Very independent, Leos will continue to mind their own business and lead their lives, but the person they meet will start to take up space in their thoughts. The Leo will start endless discussions with this person and will also seek to get to know him better. You will feel loved and listened to and you may think about opening your heart to this interesting person.

Also read: These zodiac signs can strike it rich in 2023. They will have a fantastic year

Virgin

Virgo sign

Virgo sign. source: spm

Virgos are known to be very cerebral and think too much. The natives of this earth sign are very rational and ask themselves a lot of questions during the beginning of the year 2023. Very lonely, Virgos also tend to solve their problems without asking others for help. But at the end of January, with the transit of Venus in Pisces, the natives of Virgo will be surprised by an unexpected encounter… A highly educated person with whom they will be able to interact; they will be intrigued by your knowledge. This end of January could change the way Virgo sees things and could adopt a more open behavior with others. This person can bring them positive things and help them understand certain issues in their lives.

Also read: 3 zodiac signs will be lucky in February: they will get everything they want

You may also like :   How to save an overly salty dish
Continue Reading

Health / Home

How to germinate lavender in a cup to scent the house

Published

on

L’astuce pour faire germer de la lavande dans une tasse 2 final

Lavender, also called lavandula, was used in ancient Rome to scent clothes and baths. It was also used in Provence in the Middle Ages, to compose pharmaceutical recipes. This plant is highly appreciated for its sweet and candid smell, which has earned it its commercialization in various regions of the globe. Discover in this article how to grow this aromatic plant in your home.

Essential oils have several properties and can also perfume the interior of a house. They are also very effective against insomnia, stress, body aches, itching from insect bites, migraines, and skin problems, among others. Lavender is one of its oils, which is recommended to have at home. Here are the steps to follow to germinate this plant at home.

Why plant lavender at home?

lavender plantation

Lavender plantation. source: spm

In addition to the pleasant and refreshing aroma that it gives off, growing lavender at home has several benefits.

Also read: Lavender grey: the new trend to camouflage gray hair and bring your hair back to life

In addition to its calming properties, this aromatic plant also helps to repel moths, lice, and various parasites. But it does not stop there, since the latter is ideal for embalming your home. The rest, growing lavender at home is very easyeven if the only means you have is a simple cup.

To sprout lavender in a glass, cup, mug, or bowl, you will need:

Once all these elements are combined, the following is quite simple. Just follow the steps below:

lavender plant

Lavender plant. source: spm

  • Put the lavender seeds in a perfectly airtight bag and place it in the refrigerator for three weeks.
  • In a container, mix the soil and fertilizer, making sure the amount of soil is greater than the amount of fertilizer.
  • Place the mixture obtained in the glass or any other container provided for this purpose, then put the seeds in it, separating them 1.5 centimeters from each other.
  • Fill the cup with soil to cover the seeds.
  • Gently water the seedlings and repeat the operation every morning.
  • Make sure the planting gets plenty of light without direct sunlight.

After two weeks you should notice an evolution, but it is during the first month that the plants should start to appear. From this moment, they will need the sun episodically

Also read: The advice of florists to store cut flowers for 1 month or more

Do not hesitate to prune the stems that take too much height, they will only be stronger. It is also possible to change the support of your plants without planting them directly in the soil of your garden.

exists today, multitude of products made with lavender or lavender essential oil that will be very useful at home.

Also read: Does your houseplant no longer grow? This is what you should do with it right away.

You may also like :   5 Wood Ash Fireplace Uses for Home and Garden
Continue Reading

Trending