You have decided to change your car… it is a wise decision, and certainly well thought out. Your budget limitations do not allow you to buy new ones. The second-hand market opens before you, with the best and also the worst. You are not an automotive specialist… Don’t lose! As much as you are sure of yourself from the exterior and interior aspects of the coveted vehicle, but then the engine… It’s the “black beast”! Rest assured that in five minutes and a few small tests you will be able to check the wear of the engine and surprise yourself.
For every motorist, the engine is an essential part. However, it is not uncommon for it to stall or choke. Since then, you have always sworn to yourself that one day you will understand something like the greatest experts. For you, we take the time to discuss with them. They check only by hearing, seeing, and sometimes by touch. Explaining the possible fault and above all understanding what you are looking for, in five minutes you will know which vehicle to dispose of and which to keep.
All small checks are carried out with a cold engine. It is important to insist particularly on this point. The motor is a lubricated and regulated element. When it is hot especially, it reaches the maximum of its use. Many elements allow you to get an idea of your good health. To do this, your observations will be made with the top up in a sheltered and dry place while equipped with a flashlight.
Test 1: Engine Overview
The first inspection is done with a torch. Just look at the visible parts of the engine block – the top cover and the side parts. These parts must be smooth and without any type of deposit.. If not, a crust has formed, then it can be said that the engine maintenance was not carried out correctly. The oil used was undoubtedly of very poor quality.
Test 2: Belts
With the engine compartment open, the seat belts cannot be missing. Yes, it’s this set of pulleys (non-geared wheels with little grooves) and belts (sort of stretched elastic bands). These parts are very important for the operation of the engine: they distribute the movements to different fundamental elements: synchronization, starter, various pumps, etc.
By leaning over, you can inspect them by following them with your hand. The belts must not be damaged: no tatters, no cuts, no signs of wear, which would indicate that they no longer hold the tension or that they could break at any time. All these anomalies are serious. They require major repairs and can compromise the partial or total integrity of the engine.
When you start the engine you will see them in action, perhaps for some models it will be necessary to ask to remove the cover that protects them from dirt. They will start spinning and when you listen, they shouldn’t make any particular noise. If you hear a loud screeching or grinding noise, there is one or more problems. Therefore, the belts are loose or the pulleys are damaged.
Test 3: The oil dipstick
You will go in search of the oil dipstick. You already know this part: it is a tip in which a zipper is inserted. This iron bar is sometimes colored: it is the place where the oil level is checked. For your test, this time, you will check for oil retention. To do this, rub the drops of lubricant on your fingers, they must not contain any metallic deposits. If so, serious problems are expected and the pistons must be in trouble.
Test 4: The filler cap
In the longitudinal part of the engine you will find a plug with notches. Oil is poured into it when it is drained or filled. This is your last test! This stopper and from the opening must be free of any deposit. If you find a whitish powder there… it’s serious: the head gasket is compromised. Essential component, ensures the tightness and proper functioning of the vehicle. From that moment, the engine will not be able to work and the vehicle will be immobilized.
You can see it: you don’t have to be a great specialist to get an idea of the general state of a vehicle’s engine. Of course, an inspection by a mechanic will also ensure that the vehicle is working properly.
read also How do I know if the brake fluid needs to be replaced? The mistake many motorists make
How to hide electrical cables in the house?
Did you just move in and install your TV? But one thing bothers you when you get comfortable on your sofa. You see electrical wires dangling behind your TV. Looking for a solution to hide those electrical cables. No panic! We have a solution for you. Follow the guide.
You have to admit, when it comes to decor, electrical cords tend to ruin everything. They invade and clutter your space. To do ? Rest assured, we’ve got some tips for you that will make tidying up your cables easier and keeping your unsightly cords quiet.
There it is done! You have bought a state-of-the-art television and you want to mount it on the wall in your living room. But dangling cables spoil the aesthetics of your living room and you don’t want to see them… They get tangled up and hang in front of your TV cabinet. And you don’t know what to do! Fortunately, there are simple and inexpensive solutions to store them and make them blend in with your interior. enlarge tricks to hide these electrical cables without anyone noticing.
Also read: What are the dimples on golf balls used for?
Use a gutter to hide electrical wires in the house
Are you looking for the best trick to hide and store the electrical cables of your television? Nothing is easier. Help yourself with electrical conduits: This is a very common solution to hide cables. They stick to the wall and even to the ceiling. You will choose them according to the number of cables to hide… More or less thick. White cable covers can be repainted to match your interior décor. Decorative ideas? Opt for bold yellow and give your interior a boost or even black for an industrial style and a graphic touch…
Hide electrical cables in a storage box
Storage boxes are very useful for storing your power strip and keeping your home organized. They are very easy to install and you can find them in all decoration stores or supermarkets. You can also make your own storage box in which you will cut a hole to pass all the cables connected to the power strip, like a pro! If you buy them ready-made, they are made up of pre-cut holes to facilitate the passage of cables and extensions.
Use your electrical skirting boards to hide your electrical cables
If you are looking for other more aesthetic solutions to hide your electrical cables, you can opt for electrical skirting boards that will serve to hide an electrical network. This option is practical and you can also provide an original touch by painting them so that they fit better with your decoration. Not smart!
Also read: Avoid using the washing machine at these times, it consumes twice the energy
Make a DIY to hide your electrical cables
If you’re into creative arts and home decor, you should appreciate this inexpensive hack. How to dress your electrical cables? Nothing is easier! So that they do not spoil your beautiful interior decoration, you can turn them into a modern wrap. Rope around the cables or macrame, for a guaranteed effect of jungle, marine or bohemian style. It is up to you to choose the theme that suits your decor. Another tip to save money? Pieces of fabric that can elegantly wrap your cables.
You already know, dear readers, the tips to hide your electrical cables in your home and keep your interior well organized. Your cables will be stored impeccably. You will be surprised by the magnificent result. What are you waiting for to try them?
Also read: Not paying a fine: what are the risks?
How to remove condensation from windows with baking soda?
In the cold season, windows are exposed to a rather annoying problem, which is not always easy to get rid of. Obviously we are talking about condensation. It’s unpleasant isn’t it? Fortunately, there is no shortage of solutions to solve this problem effectively. This is what we offer you in this article to quickly remove annoying drops of water from your windows. Come on, let’s get started!
Condensation on window glass is a common problem and can quickly cause damp, mold and tarnish the appearance of your interior. Do you want to avoid this? We advise you to rely on a very simple product that is probably somewhere in your kitchen. Follow the guide!
Why is there fog on the window panes?
Tired of fogging up the window panes? Understand that this is a result of the humidity in the outdoor air being lower than that of the indoor air. In other words, it is what happens when the hot surface inside comes into contact with cold outside air. Hence the appearance of fog.
Also read: Put salt under the bed: this is how to solve a problem that many have at home
The problem can get worse… If your windows are not well insulated and the humidity is high… The level of condensation is even higher. Fortunately, there is no shortage of quick fixes for this problem, and one of the best can be found in your pantry: baking soda.
Sometimes the answer to your window condensation problem may simply be a common but versatile kitchen ingredient. And yes, the grandmother’s method will allow you to shorten this inconvenience. This is baking soda which is great against fogging. To use it, the operation is very simple. Are we starting?
- Dissolve a teaspoon of baking soda in a glass of hot water
- Soak a soft, clean cloth in the solution.
- rub the windows gently
- Remove residue with a slightly damp cloth.
- One last pass and your windows will look impeccable. It’s easy isn’t it?
Well that’s it !
It is not finished! If you want to use an alternative method of minimum effort, please pay 1 glass of baking soda in a container before placing it on the misted windowsill. Excess moisture will be absorbed by dust, keeping your window fog-free and in pristine condition.
Rock salt is the other thing we suggest you use if you don’t have baking soda because it achieves the same effects. Add salt to one or more containers then place them on window sills. The crystals will soon defog your window panes. Here he is willing to fight this inconvenience for three francs six sous. Efficiency and economy, what more could you ask for.
How to prevent windows from fogging up with means other than baking soda?
Alternatively, there are other tricks to remove condensation from windows besides the baking soda and salt technique. One of the simplest is to adopt a simple reflex gesture that is none other than ventilate the rooms regularly. So open the windows about 20 minutes a day because the renewal of the air evacuates the humidity.
Do you want to reduce humidity? Invest in a dehumidifier for healthier indoor air. With these approaches, you can say goodbye to raindrops on the windows. It is practical, simple and effective, don’t you think?
Tips to remove moisture from the window of your house
To fight against the phenomenon of condensation, in addition to these tips, you can follow certain simple steps to optimize the comfort of your home. Whether it is to protect your bathroom from this problem or your bedroom, here are some tips to follow:
Adjust the heating to avoid the problem of condensation on your interior windows
Proper heater settings go a long way toward eliminating condensation on windows. So be sure to adjust the heating to create the right balance. between the heat inside your home and the humidity.
Take the opportunity to lower your heating bills by taking the right steps!
Consider investing in a VMC to remove fogging from your windows
VMC (Controlled Mechanical Ventilation) is one of the best ways to optimize the humidity in your interior. Its use allows you to help eliminate condensation from your windows and prevent the formation of mold inside the house. The VMC is therefore an excellent investment to improve humidity and therefore, the quality of indoor air.
Use houseplants to prevent condensation on windows and prevent mold in the house
What if we told you that you can reduce the humidity level in your interior by having a green thumb? There are precisely several indoor plants such as thea boston fern or spider plant that helps reduce humidity in the surrounding air while exuding oxygen. These plants help reduce condensation in the house and on the windows while preventing the formation of mold and therefore possible health problems. Here’s how to combine the useful with the nice and beautiful!
Also read: High bills due to heating? The blame for these two mistakes that should not be made
Why opt for double glazing to prevent condensation inside?
An effective approach to mitigating condensation in your home is to rely on double-glazed windows. The latter allow themimic the temperature differences between the outside and the inside. Result : You reduce the phenomenon of fogging, thanks to its thermal barrier. And you get rid of this inconvenience that spoils your comfort! Smart, right?
Have you decided, dear readers, to apply these simple and effective tips? Happiness ! You will gain insurance by avoiding condensation on your windows and improving the indoor air in your home.
Also read: The carpet trick to heat the whole house: goodbye to very high bills
How to defrost a freezer without unplugging it
Periodic defrosting of the freezer is an important operation to maintain the efficiency of the appliance and save on the electricity bill. The layer of ice that forms inside it can have various consequences on the efficiency, duration and above all on the consumption of the appliance. Find out why defrosting your freezer saves energy and how to do it quickly without having to unplug it.
Why is it necessary to defrost the freezer regularly?
Periodic defrosting of the freezer is an important operation to maintain the efficiency of the appliance and avoid consuming a lot of energy. This operation, if carried out correctly, would save 30% of your consumption for every half centimeter of frost removed. Here are the reasons.
Reduce energy consumption
The layer of ice that forms inside the freezer is several inches thick and can reduce the efficiency of the motor, making it work harder and therefore consume more energy. This happens because the layer of ice acts as a barrier to the flow of heat from the outside environment to the motor, causing it to increase its speed to maintain the desired temperature inside the freezer. In addition, the thermal resistance of the freezer walls increases, making it difficult for heat to transfer from the outside environment to the inside of the appliance. Therefore, removing excess ice allows the engine to run more efficiently and consume less electricity.
Also read: How to defrost car windows? This little-known button does it in 2 minutes
By preventing proper heat exchange with the outside environment, the layer of ice inside the freezer can cause the motor to overheat. When the motor overheats, its efficiency decreases and power consumption increases. Also, overheating can damage the motor and shorten the life of the device. Therefore, by defrosting your freezer, you prevent the motor from overheating and protect the appliance from damage that excessive heat can cause.
Improve conservation efficiency
The layer of ice inside your freezer can prevent the circulation of cold air, reducing its ability to store food. When cold air is not circulated properly, some areas of the freezer can get hotter than others, creating the ideal conditions for bacteria to grow and food to spoil. By removing the accumulated ice, a better circulation of cold air is guaranteed and therefore a better conservation of food, thus avoiding its waste.
How often should the freezer be defrosted?
The ideal time to defrost the freezer depends on the layer of ice that has formed inside the appliance. Generally, it is advisable to carry out this operation when the ice layer has reached a thickness of about 3-4 millimeters, since at this stage its energy consumption can increase by up to 30%. If the appliance is used frequently and the ice layer forms quickly, it will need to be defrosted more frequently. Conversely, if it is used less frequently, the ice layer will form more slowly and the frequency of thawing may be reduced.
Also read: Turn on your radiators only at this time: you will save on your electricity bill
Obviously unplugging it is the easiest way to defrost a freezer, but how do you do it even when it’s plugged in? Unplugging the appliance runs the risk of compromising the preservation of both food in the freezer and food stored in the refrigerator. These are the steps to follow to defrost it even when plugged in:
- Remove all food from the freezer and place it in a cool place.
- Place a saucepan with boiling water inside to raise the temperature and collect the water that will form when defrosting
- Close the freezer and wait for the ice to melt. This way, the heat from the boiling water will help melt the ice faster.
- Open the freezer from time to time to let in warm air, which will also help melt the ice faster.
- Use a damp cloth, towel, or blunt object to remove any remaining ice. Avoid using pointed or sharp objects, as they could damage the finish of the freezer and also injure you.
- Completely dry the freezer.
- Close the freezer and wait for the temperature inside the appliance to return to its normal values before putting the food back in its place.
Also read: The simple and easy trick to defrost the freezer in 15 minutes
Well Being3 months ago
10 underrated healthy habits to free up energy and vitality
Family / Couple3 months ago
To have a satisfying sex life, you need to look at sex in this way
Psychology & Diet3 months ago
The exact amount of protein you need for muscle building
Health / Home3 months ago
How to perfume the whole house with the tip of the bottle on the radiator?
Psychology & Diet3 months ago
Dyslexia: researchers identify more than 40 genes linked to this learning disability
Psychology & Diet3 months ago
Why is it so important to taste the food?
Well Being3 months ago
7 health benefits of doing Pilates
Health / Home3 months ago
3 zodiac signs that are most often betrayed by their partners: they have bad luck