Discover the hidden function of this button located on the tongue of your seat belt.
What is the function of seat belts?
The first car manufacturer to mass-produce a vehicle equipped with a seat belt was the Volvo company in 1959. Nowadays, its use is mandatory and certain considerations must be taken into account:
- This element must adapt to the body of the occupant.
- The vehicle seat must be adjusted for each passenger so as not to reduce the effectiveness of the seat belt in the event of an accident.
- The good condition of the seat belt must be checked once fastened.
The most important function of seat belts is to provide protection in the event of an accident. They keep the passenger in place. They eliminate the risk of death, which is often caused by an impact against the dashboard or windshield.
Its function is to keep the belt buckle at the correct level. Thanks to this, it does not slip, and fastening the seatbelt is faster and easier. It often happens that the buckle slips behind the seat and searching for it is not an easy task.
In addition, the belt buckle prevents the metal tongue that locks the belt from hitting a part of the vehicle while driving and causing annoying rattling. Since it is often used by the driver when he is driving, the release buckle is only on the passenger side. However, not all car models have such a buckle on their belts. Sometimes this little plastic button replaces the function of the buckle.
Remember to properly fasten your seat belts. The part of the belt that covers the hips must always be below the belly line. The shoulder part, on the other hand, should run diagonally down the torso. In this way, it is easier to protect yourself in the event of an accident.
Keep in mind that seat belts also help maintain good posture to reduce the force of a crash.
What to do if the belt is stuck?
Although the seat belt does not require much maintenance, you still need to make sure that it is working properly.
Check if the tape is wound correctly and is not deformed.
Do not try to repair the seat belt yourself. Especially if you don’t have any special tools or knowledge needed to do this. This element is so sensitive that it is better to consult a specialist.
In some cases, dirt or greasy residue can interfere with the proper function of your band. In these cases, remove it and wash it with soap and water until it is completely clean.
read also The Secret Feature Of The Seat Belt Tongue – Every Driver Is Getting In On It And The Reason Is Brilliant!
How to change the color of the WhatsApp keyboard?
Are you tired of the monotonous appearance of your WhatsApp keyboard? Want to add some color to your messaging experience? It’s time to give this app a unique style for you. Discover this WhatsApp function that will allow you to achieve it.
Beyond replacing the wallpaper with another image, one of the functions that marks a real change is being able to change the color of your WhatsApp keyboard. Here we show you how to achieve this effect in a very simple way.
- First of all, download the Google keyboard called Gboard on your mobile. Then set it as default.
- Next, open the WhatsApp app and click on any conversation.
- Start writing a text, you will see a kind of gear on the keyboard part.
- Press it, a different menu will appear. Go to “Theme” and choose the color you want configuring it to your liking. There are several models.
- When finished, the color of the WhatsApp keyboard will have changed.
Thanks to this trick, your messages will stop being boring and will now be more creative, although only people with the beta version of WhatsApp will be able to make this change. Since WhatsApp does not include any button or method for this type of text to appear, so it will only appear if you do it manually.
Also read: The trick to activate reverse writing in WhatsApp: secret mode to surprise your friends
Other tips to customize your WhatsApp chats
How to write bold on WhatsApp?
To create bold text, simply place an asterisk before or after the text you want to send to your contacts. So, the text before sending looks like this: *your sentence*.
How to write in cursive on WhatsApp?
If you want the text to be italicized, place an underscore before and after the text. That is, before sending the declaration: _your text_
Also read: Locate any contact on WhatsApp, without asking for their location with an easy trick
How to write crossed out words in WhatsApp?
If you want to write text as if it were struck through, you will need to use this symbol (~) before and after the text. So it will appear like this before sending: ~your phrase~.
How to write in minivan in WhatsApp?
Writing in a monospaced font in WhatsApp will give your text a vintage and different touch. To get this type of text, all you have to do is put the word or sentence between three open accents (`) like this: “`your sentence“`.
Also read: WhatsApp: how to prevent the application from automatically saving photos that fill the memory
How to prevent boiling water from boiling over: simple and practical tips
It is well known: to prepare a recipe based on pasta or rice, it must be immersed in a large volume of boiling water. But very often, our pan always ends up overflowing… Don’t panic! We reveal the advice of Thomas Langevin, chef of the Aude to avoid this unfortunate inconvenience and succeed in your culinary preparations on time.
add oil to water
When you boil vegetables, rice or pasta, you notice the formation of a foam on the surface of the water. In heat, the bubbles exert pressure, often causing spills.
To avoid these inconveniences, add oil to the water, it acts well on the foam, preventing it from forming. This will prevent the water from overflowing. Remember that it is important to act at the right time, so add the oil from the beginning of cooking.
Also read: The magic trick to open a glass jar too tight without forcing
Sometimes it also happens that water spills out for a simple reason – long-term use of a lid on the pot. This tool certainly saves time by heating the water more quickly, but it prevents the escape of water vapor.
Use a wooden spoon
There is another very simple and equally effective trick to prevent the water from overflowing from the pan, place a wooden spoon and that’s it!
The wood acts as an insulator. The bubbles that form when the water boils will thus be reduced thanks to the contact with the wood.
Why does pasta water foam?
Pasta is made from flour, water, and sometimes eggs, starch, and protein are dried and stored in it. When you put them in boiling water, a hot and humid environment, the starch continues to absorb more and more water until it bursts. The result is that the starch molecules are pushed into the water, creating the foam you see.
The starch also causes the pasta to stick together in the middle of the cooking process, so you need to stir occasionally to prevent a giant dough from forming. Once the pasta has finished boiling, the water becomes saturated with starch. So adding a bit of this water to your seasoning will allow the sauce to adhere better to your pasta.
Rice is a staple in many kitchens. It is very simple and easy to prepare. However, when cooking, boiling water can quickly overflow. This is the best method to prevent the rice from boiling over and sticking.
Also read: I always have a bottle of rice at home, this amazing thing saves me a lot of trouble.
- Rinse your rice in several changes of water to remove excess starch.
- Place the rice in a larger pot. This trick simply allows larger bubbles to form so that the liquid properly covers the beans.
- After boiling, reduce the heat to very low.
- The rice may take a few more minutes to cook.
If it often happens to you that the rice sticks to the pot, add vinegar during cooking. The effect is achieved by its high content of acetic acid.
To use it for this purpose, once the water starts to boil in the pot, add a little apple cider vinegar and wait for it to come to a boil again. When you add the vinegar, lower the temperature for a few moments. Then we add the rice and cook as usual, controlling the intensity of the heat and stirring from time to time so that it cooks evenly and thus does not stick or burn.
Also read: Why shouldn’t boiling water be poured into the sink? The big mistake that many people make
Extractor hood cleaning: 7 tips for the home
Getting down to business to clean the kitchen hood is not an easy and pleasant activity. Fortunately, there are several effective methods approved by our grandmothers to simplify this task. Thus, stubborn grease and dust will disappear in no time. Here’s how to make your cooker hood glow with home hacks.
Dishwashing liquid to remove dirt
Dishwashing liquid is ideal for removing stubborn dirt and grease from the cooker hood. To carry out its cleaning, you will need a large bowl, in which you pour half a glass of dishwashing liquid and hot water. Then mix the solution well until it forms a foam. Use a sponge to thoroughly clean the entire hood. Then rinse the sponge to clean the hood again. Finally, dry the surface with paper towels or a dry kitchen towel.
Vinegar Water to Fight Hood Grease
Vinegar water is an old method of removing hood grease, and a very effective one at that. To do this, you will need vinegar, a spray bottle, and warm water.
Also read: Do not throw away the apple skins, put them in a jar: you will save a lot
First, mix equal parts of water and vinegar and pour it all into the sprinkler. Carefully spread this solution on the grid as well as the rest of the device. Let the mixture rest for 15 minutes. After this time has elapsed, use the pointed end of the sponge to gently remove any stubborn dirt, then wipe with a damp cloth and dry the hood with paper towels or a dry cloth.
Olive oil for a clean cooker hood
As it turns out, olive oil can have many uses in a kitchen, especially cleaning the range hood. First, apply a small amount of oil to the entire surface of the hood using a sponge. Then cover it with a microfiber cloth soaked in warm water. After a few minutes, scrub everything down with a sponge and wipe clean.
A dishwasher tablet for a hood like new
To avoid the accumulation of grease and dirt in the hood, clean it with a mixture of hot water and dishwasher tablets that will melt. Begin by spraying the areas to be cleaned. Let the solution sit for 30 minutes to 1 hour, depending on the amount of embedded dirt. Then use a damp cloth to easily remove the grease.
Baking soda for a clean hood
Baking soda is our best ally in many household tasks. It has strong cleaning properties as it is a caustic substance. First, bring the water to a boil in a medium saucepan, then add two tablespoons of baking soda. The mixture will start to foam after a few minutes, this means it is ready to use. Use a sponge soaked in this foam to carefully clean the entire surface of the hood and vent. If the entrance is too narrow, clean those hard-to-reach areas with a toothbrush. Finally, dry the entire hood and grill with paper towels or a microfiber cloth.
Salt and limestone for a nickel bell.
For effective cleaning of your cooker hood, use a solution based on salt and limestone by mixing the ingredients in hot water. Apply the mixture to your hood with a soft cloth, then rinse and buff for a flawless result.
Lemon to clean the hood
To clean your range hood, boil water with lemon or lemon juice. Turn on the range hood to draw in the steam for 15 minutes. After that, wipe the hood with a soft cloth, rinse and wipe it.
To clean your cooker hood filters that are clogged with grease, you must first remove them using the retaining clip located on the front or side depending on the model. Prepare a cleaning bath in your sink or bathtub, then submerge your filters in it. You can soak them in a solution of boiling water, baking soda, and dish soap for 30 minutes, or use a mixture of boiling water and black soap shavings. Once the filters foam, use a soft brush to scrub them, rinse them with clean water and let them dry. Once clean, the filters are ready to be used again.
For the final maintenance of your hood, clean the exterior walls. Dampen a soft cloth with isopropyl alcohol and gently wipe the entire device to restore its shine. If your range hood is a traditional range hood with a chimney covered with plaster or wallcovering, use a small vacuum brush to remove any dust, then wipe with a damp cloth and some mild cleanser.
Also read: Why do you have to put shaving foam on the mirror once a month? Gets rid of a problem we all have
How often should the cooker hood be cleaned?
To keep your cooker hood in good condition, it is recommended that you clean it every two months with normal use. However, if you use it frequently, more frequent cleaning will be required to prevent grease buildup.
Also read: Put a dishwasher tablet in the washing machine: you won’t regret it!
Well Being3 months ago
10 underrated healthy habits to free up energy and vitality
Psychology & Diet3 months ago
The exact amount of protein you need for muscle building
Family / Couple3 months ago
To have a satisfying sex life, you need to look at sex in this way
Psychology & Diet3 months ago
Dyslexia: researchers identify more than 40 genes linked to this learning disability
Psychology & Diet3 months ago
Why is it so important to taste the food?
Health / Home3 months ago
How to perfume the whole house with the tip of the bottle on the radiator?
Health / Home3 months ago
3 zodiac signs that are most often betrayed by their partners: they have bad luck
Well Being3 months ago
7 health benefits of doing Pilates